Boat Seats Materials
Need to know how sercure Boating?
I'm open Boat with two benches looking to make their own floor. But the materials for the flooring needs know how you sercure / attach boating. It doubles enoungh strong navy or need reinforment beneath him in the middle?
You do not say if you boat has a fiberglass or aluminum boat. Assuming you have an aluminum boat, he must have reinforcements on the floor placed every two meters, buying up almost 3 / 4 inch treated wood green and make a card board templete the bottom of the boat. Place the template over the wood and cut out the shape of your boat bottom, check the wood in all places there is a rib, then drill 1 / 8 inch holes in the plywood on the lines where the ribs sit after making holes with a back drill 3 / 8 inch and counter sink the hole about 1 / 4 inch deep. You'll need about 3 / 16 inch x 1 1 / 8 inch self drilling screws conic. Place the timber in the bottom of the boat make sure your holes are directely over the ribs. Drive the screws into the holes you have drilled in the ribs and the boat. After all bolts are in place that you can paste to your door out of the interior carpet to the floor. If you are trying to make a platform like a boat fishing, then the process is a little differant. If you add your message here let me know if this is what you want, then I can also tell you how to do this
Boat Seat Driver on The JCMDI Comedy Show
